Main / materials / Overlapping TERIVA
Overlapping Teriva (TERIVA) - this
ready-piece construction, which is designed for the cottage, residential and nonresidential construction. Teriva consists of lightweight concrete beams and hollow blocks aggregate. Top design is filled with a thin (3 cm) layer of concrete. This kind of overlap - a quality alternative to expensive and heavy monolith and a standard, often uncomfortable slabs.
Simple and quick installation is one of the main qualities overlap Teriva. For the device overlap should not be used formwork and pre-fill armapoyas (armopoyas fit in flush with the ceiling, this design evenly distributes the weight of all bearing walls). All you need is to arrange the props, to disrupt the beam and block filler and fill all the thin layer of concrete. Teriva overlap can be mounted even in buildings where there is already a roof. Overlapping Teriva adaptable to any project easy traverses stairwells, chimneys and bay windows and complex avoids monolithic sites which increases the cost of construction.
The lightweight concrete beams Teriva, depending on the design loads, consisting of three or more reinforcing rods embedded in concrete foundation. The length of the beams viriruetsya 2.2m to 8m.
Hollow filler block for 90% composed of expanded clay - environmentally friendly material that is obtained by firing foam clay. Due to the porous structure of the material and the emptiness of the block, ready perekryite has high rates of noise and teploizolitsii, as well as keramsit never see mold or mildew. LECA effectively regulate humidity in the room, so the microclimate in the house will be optimal. In addition, the blocks, as well as the beam is very lightweight, so installation of the overlap can be successfully done by hand without the use of heavy construction equipment.
Overlapping Teriva much cheaper monolithic slabs and is comparable in price with the floor slabs. Price ceilings Teriva from 170 to 260 UAH. per m2. The final cost of the overlap is calculated individually for each project and depends on the width of the span.
The advantages of overlapping Teriva:
- Quick and easy assembly;
- Excellent adaptability;
- High heat and sound insulation;
- High adhesion of plaster;
- Lightweight overlap.
Video montage of overlap TERIVA.